How to connect the power cord of the welding machine
Welding machines are commonly used tools in industrial production and home maintenance. Correctly connecting the power cord is the key to ensuring safety and effectiveness. This article will introduce in detail the wiring method of the power cord of the electric welding machine, and attach relevant data tables to help users quickly master the key points of operation.
1. Preparations before wiring the power cord of the welding machine
1.Check the welding machine model: Different models of welding machines have different requirements for power supply voltage and current, so you need to confirm the equipment parameters.
2.Preparation tools: Including screwdrivers, wire strippers, insulating tape, etc.
3.Power off operation: Make sure to disconnect the power supply before wiring to avoid the risk of electric shock.
| Welding machine type | Input voltage (V) | Input current (A) |
|---|---|---|
| small household welding machine | 220 | 20-30 |
| Industrial welding machine | 380 | 30-50 |
2. Steps for wiring the power cord of the electric welding machine
1.Peel off the power cord: Use wire strippers to peel off the outer sheath of the power cord to expose the internal wires (usually three: live wire, neutral wire, and ground wire).
2.Distinguish wire colors: According to national standards, the live wire (L) is brown or red, the neutral wire (N) is blue, and the ground wire (PE) is yellow-green.
3.Connect welding machine terminals: Connect the wires to the terminals of the welding machine, usually marked with L, N, and PE marks.
4.Fixing screws: Make sure the wires are firmly connected to avoid looseness leading to poor contact.
5.Insulation treatment: Wrap exposed wire parts with insulating tape to prevent short circuits.
| Wire type | Color identification | Terminal block |
|---|---|---|
| Live Line (L) | brown/red | L |
| Zero line (N) | blue | N |
| Ground wire (PE) | Yellow-green | PE |
3. Common problems and solutions
1.The power cord is hot: It may be that the cross-sectional area of the wire is too small or the contact is poor. It is necessary to replace the wire with a suitable diameter or retighten the wiring.
2.The welding machine cannot start: Check whether the power is on and whether the wires are connected correctly.
3.Leakage protector tripped: It may be that the ground wire is not connected or the insulation is damaged, the circuit needs to be checked.
4. Safety precautions
1. The power must be turned off when wiring to avoid electric shock.
2. Use power cords that comply with national standards to avoid fire caused by inferior materials.
3. Regularly check whether the power cord is aged or damaged and replace it in time.
Through the above steps and table data, users can clearly understand the correct wiring method of the welding machine power cord to ensure safe and efficient use of the welding machine. If in doubt, it is recommended to consult a professional electrician.
check the details
check the details
en
