How to use Envision Cruise
With the continuous development of automotive technology, cruise control systems have become one of the standard features of modern vehicles. As a popular SUV under Buick, the Envision's cruise function has attracted much attention from car owners. This article will introduce in detail how to use the Envision cruise system, and provide you with a practical guide based on hot topics and hot content on the Internet in the past 10 days.
1. Introduction to Envision cruise system
Envision is equipped with an advanced cruise control system, including fixed speed cruise and adaptive cruise (some high-end models). This system can help drivers reduce fatigue and maintain a stable vehicle speed during long-distance driving.
| Cruise type | Applicable scenarios | Features |
|---|---|---|
| cruise control | Highways and roads with steady traffic flow | To maintain the set speed, the driver needs to control the distance between vehicles |
| adaptive cruise | Various road conditions | Automatically adjust vehicle speed to maintain a safe distance from the vehicle in front |
2. How to use the Envision cruise system
1.Start cruise system
While the vehicle is driving, press the cruise control button on the steering wheel (usually marked "CRUISE" or a cruise icon), and the instrument panel will display a cruise readiness prompt.
2.Set cruise speed
When the vehicle speed reaches your desired cruising speed (usually above 30km/h), press the "SET-" or "SET+" button to set the current speed as the cruising speed.
| Action button | Function description |
|---|---|
| CRUISE | Turn cruise system on/off |
| SET+ | Increase cruising speed (approximately 1km/h each time you press it) |
| SET- | Reduce cruising speed (approximately 1km/h each time you press it) |
| CANCEL | Temporarily cancel cruise (without shutting down the system) |
| RESUME | Restore the last set cruise speed |
3.Adjust cruise speed
During cruising, you can fine-tune the cruising speed through the "SET+" or "SET-" button. Long presses on these buttons allow for larger speed adjustments.
4.Cancel cruise
There are several ways to cancel cruise: - Press the brake pedal lightly - Press the "CANCEL" button - Press the cruise switch to turn off the system
3. Additional functions of adaptive cruise (ACC)
For Envision models equipped with adaptive cruise system, you can also set the following distance:
| Following distance level | Applicable scenarios |
|---|---|
| 1st gear (most recent) | Smooth section of expressway |
| 2nd gear | Ordinary urban expressway |
| 3rd gear (farthest) | Congested roads or rainy days |
4. Precautions when using the cruise system
1. The cruise system is not automatic driving, and the driver still needs to maintain control of the vehicle and pay attention to the road conditions.
2. It is not recommended to use the cruise system in the following situations: - Congested urban sections - Mountain roads with many curves - Rain, snow and other bad weather - Slippery road surfaces
3. Regularly check the vehicle's braking system and sensors to ensure that the cruise system is working properly.
5. Recent hot topics and discussions related to cruise systems
According to the hot spot data analysis of the entire network in the past 10 days, the following are the cruise system-related issues that car owners are most concerned about:
| Popular questions | Discussion popularity |
|---|---|
| What should I do if the Envision cruise system suddenly fails? | high |
| Fuel consumption performance in cruising state | Middle to high |
| Adaptive cruise car following logic | in |
| Issues related to cruise system upgrade | in |
6. Frequently Asked Questions
Q: Why does the vehicle suddenly accelerate while cruising?
A: This may be because the system detects that the vehicle ahead is accelerating or driving away, which is a normal response of adaptive cruise. If the situation is abnormal, it is recommended to cancel the cruise immediately and check the system.
Q: Why sometimes the cruise system cannot be activated?
A: Possible reasons include: the vehicle speed does not meet the minimum requirement, the brake light switch is faulty, the cruise system fuse is blown, etc. It is recommended to go to a 4S store for professional testing.
Q: How much fuel can the cruise system save?
A: On a flat highway, rational use of the cruise system can save 5-10% of fuel. The specific effect depends on road conditions and driving habits.
7. Summary
Envision's cruise system is a practical and intelligent driving assistance function. Correct use can significantly improve the comfort and safety of long-distance driving. Through the detailed introduction in this article, I believe you have mastered the use of Envision cruise system. In actual driving, please use it reasonably according to the road conditions and maintain control of the vehicle at all times.
If you have other questions about the Envision's cruise system, it is recommended to consult the vehicle manual or an authorized Buick dealer for more professional technical support.
check the details
check the details
en
